The KTI KS-124 switch is a 24-Port 10/100Mbps switch designed for workgroup applications. Each port can provide full-duplex connection up to 20Mbps or 200Mbps by auto-negotating the network speed and duplex type with the other end of the link. The KS-124 is designed to improve the network traffic congestion in traditional shared media network, and to offer a cost effective and flexible solution to most workgroups where 10M to 100M migration, 10M and 100M integration, and higher bandwidth are needed. The KS-124 is a plug-and-play device which requires no setting during the instalation.
Key Features:
-Complies with IEEE 802. 3 10Base-T, IEEE 802. 3u 100Base-TX
-Provides 24 10/100Mbps speed and full/half duplex auto-negotation swithed ports
-Supports auto-crossover RJ-45 jack for easy TP uplink connection
-Store-and-forward architecture with non-blocking swithing fabric
-Wire speed filtering and forwarding rate
-Support full-duplex flow contrtol (IEEE 802. 3x)
-Black-pressure flow control in half-duplex mode
-Supports full diagnostic LED indicators to display each TP port and power status
-Plug-and-play installation, no setup is needed
-19" rack mountable
Specifications:
Standard: IEEE 802. 3 10Base-T Ethernet, IEEE 802. 3u 100Base-TX,
IEEE 802. 3x Flow Control
Filtering address: Unicast/Multicast/Broadcast address: 4K MAC address
per unit
Filtering rate: 14. 880 pps for Ethernet, 148. 800 pps for Fast Ethernet
Forwarding rate: 14. 880 pps for Ethernet, 148. 800 pps for Fast Ethernet
RAM Buffer: 256KB
Connector: Shielded RJ-45
Cable: 10Base-T: Cat. 3, 4 or 5 UTP cable (100m max. )
100Base-TX: Cat. 5 UTP cable (100m max. )
LEDs: -power status for each unit
-Link/Activity, 10M (green), 100M (amper)
-Full duplex/Collision (green)
Environment: Temperature: 0 to 40 C
Relative Humidity: 10% to 90% non-condensing
Dimension: 440 x 140 x 44 mm (17, 32 x 5, 51 x 1, 73 inch )
Power: 100-240 VAC, 50/60 Hz Így is ismerheti: KS 124, KS124
Jelenlegi ára: 8 000 Ft
Az aukció vége: 2018-04-08 22:50 .
0 megjegyzés:
Megjegyzés küldése